Baratza Vario- SLEEP MODE Programming
To Program your new Baratza Vario Upgrade Panel for Sleep Mode:
This is a programmable feature to allow the lights and display to turn off after a pre-selected amount of time elapses since last grinding.
Also, there is the ability to "force" it to sleep mode by pressing and holding the START button for 3 seconds - as soon as the lights turn off you can release the button.
Touching any button will "wake it up" (but will not perform the function of the button pressed).
To program the sleep mode delay, press and hold the MANUAL button for 3 seconds until the display shows S00. This is S 00 which means Sleep mode never happens.
The up or down arrow allows selection for 3 minute delay (S03), 5 minute (S05), 10, 20, 30 or 00 . Press the MANUAL button to store the value you desire.
